How to lay instant turf and establish a new lawn
Learn how to lay instant turf with professional site preparation, soil conditioning, screeding, and rolling techniques to establish a healthy lawn in Australia.
Quick answer
To lay instant turf correctly, excavate existing vegetation and spread a minimum 100mm layer of AS 4419 certified turf underlay. Lay slabs in a staggered brick pattern with butt joints, cut edges cleanly, roll immediately to eliminate air pockets, and saturate daily for 14 days until roots anchor.
- Skill level
- Intermediate
- Time
- 1–2 days (based on an average 100m² lawn)
- Trade
- Earthmoving & Landscaping
- Updated
- 17 November 2026
Tools you will need
- Red Roo HT712 - Petrol Turf Cutter
- Kubota U17-3 - 1.7t Mini Excavator
- Barreto 1320SG - Heavy Duty Hydraulic Rotary Hoe
- Cyclone 16 Tooth - Heavy Duty Landscaping Rake
- Marshalltown 2.4m - Aluminium Screed Bar
- Dunlop Heavy Duty - Water-Filled Lawn Roller
- Olfa L-1 - Heavy Duty 18mm Utility Knife
- Gardena AquaZoom M - Oscillating Lawn Sprinkler
🏗️ Complete Trade Guide: How to Lay Instant Turf and Establish a New Lawn
How do you lay instant turf and prepare the site correctly?
Laying instant turf transforms bare or tired ground into a resilient, functional living space while adding instant street appeal and value to your home. Achieving professional results requires thorough ground preparation, correcting soil nutrition, and rolling the turf for root-to-soil contact. With the right earthmoving machinery and a systematic approach, a standard residential yard can be prepared and turfed in a single weekend.
Skill Level
Intermediate — Estimated time: 1–2 days (based on an average 100m² lawn)
What machinery and tools are required to lay instant turf?
🔧 Equipment Required
Turf cutter (self-propelled, petrol) — ideal to hire for clearing existing dead grass and weeds 1.7t mini excavator or mini skid steer (e.g., Kanga/Dingo) with a 4-in-1 bucket — hire if shifting more than 5m³ of soil or cutting deep levels Rotary hoe or rear-tine garden tiller Water-filled lawn roller (drum roller) Landscape rake (wide aluminium levelling rake) Straight edge or screed bar (2.4m to 3.0m) Sharp utility knife (snap-off blades) or a sacrificial pruning handsaw Heavy-duty wheelbarrow and square-mouth transfer shovel Hose and oscillating sprinkler or tap timer setup Hire vs Buy Economics: For a one-off backyard job, always hire the turf cutter, roller, and mini skid steer from a local plant hire depot. Buying a commercial turf cutter or loader makes financial sense only if you are running recurring landscaping contracts. If investing in plant over $20,000 (such as a commercial mini loader or 1.7t excavator package), explore plant and equipment finance via Local Knowledge Finance to preserve cash flow.What materials and soil underlay specifications are needed for new turf?
Instant turf slabs (e.g., Sir Walter DNA Certified Buffalo, TifTuf Bermuda, or Eureka Kikuyu) — order your measured area plus 10% extra for cuts and wastage Premium turf underlay soil (blend of 70% washed sand / 30% organic compost) — calculate at 100mm settled depth (approx. 10m³ per 100m²) Professional turf starter fertiliser with moisture-retaining crystals (e.g., Lawn Solutions Australia Lawn Launcher or Munns Professional Root Booster) Gypsum (if working with heavy reactive clay subsoils) Pre-emergent herbicide (optional, seasonal dependent)Safety Requirements
⚠️ Safety & Compliance
📞 Dial Before You Dig (1100): Mandatory free online enquiry lodged at least 2 business days before mechanical turf cutting, rotary hoeing, or mini excavator scraping to avoid striking shallow electrical conduits, telecom lines, or gas pipes. Council Approval: Check local council overland flow and finished surface level requirements; you must not redirect stormwater runoff toward neighbouring boundaries. Mandatory PPE: Safety boots with steel toe caps (AS 2210.3), eye protection (AS/NZS 1337.1), hearing protection (AS/NZS 1270 Class 5 for power tools/machinery), heavy-duty riggers gloves, and UV-rated sun protection (broad-brim hat, long sleeves, SPF 50+). Manual Handling: An unrolled, wet turf slab weighs between 15kg to 20kg. Always lift using your legs, keep slabs close to your chest, and team-lift pallets.Step-by-Step Guide
Step 1: Site Clearance and Excavation
1️⃣ Site Clearance and Level Excavation
Clear all debris, stones, and weeds. If existing grass is present, spray it with a non-selective herbicide 10–14 days prior, or hire a mechanical turf cutter set to a depth of 25mm to cut the old thatch into rolls and strip it away.
Excavate the area down so the finished sub-base sits roughly 130mm below surrounding solid structures (paths, driveways, garden edging, and weep holes). This leaves room for 100mm of turf underlay and approximately 30mm of turf slab thickness, allowing the cut turf to finish flush with pavers. Ensure your excavated sub-grade slopes gently away from the home at a minimum 1:100 (1%) grade for positive drainage.
Step 2: Sub-Base Preparation and Aeration
2️⃣ Sub-Base Cultivation and Decompaction
Never spread new topsoil over a compacted, hard-packed subgrade. Decompact the ground to a depth of 100mm using a rotary hoe or mini-skid steer tiller attachment.
If your base soil is heavy clay, broadcast gypsum at a rate of 1kg to 2kg per m² across the open base and cultivate it into the subsoil. This prevents an impermeable boundary layer from forming beneath your new underlay, encouraging deep root systems and preventing waterlogging.
Step 3: Spread and Screed Turf Underlay
3️⃣ Soil Placement and Screeding
Barrow or bucket-spread your turf underlay across the prepared sub-base to a loose depth of 120mm (which settles down to 100mm).
Rake out the soil using an aluminium landscape rake. Use a screed rail or 3m straight edge to eliminate humps and hollows. Pack the soil down using a half-filled water roller or footprint compaction, then run the landscape rake lightly over the top 5mm to leave a loose, smooth seedbed.
Step 4: Apply Starter Fertiliser
4️⃣ Nutrient and Moisture Prep
Evenly broadcast a dedicated turf starter fertiliser with water crystals across the screeded soil bed at the manufacturer’s recommended application rate (typically 30g to 40g per m²).
Lightly rake the fertiliser into the top 10mm of the soil. This places concentrated phosphorus directly where emerging root nodes will contact the soil, speeding up root strike and establishment.
Step 5: Lay the Turf Slabs
5️⃣ Brick-Pattern Turf Laying
Install your turf on the day it arrives. Turf is a living, perishable plant that can spoil on the pallet within 24 hours in warm Australian weather.
Start along the longest straight edge (such as a driveway, fence line, or patio edge). Lay slabs end-to-end, pushing the joins tightly together without stretching the slabs or overlapping edges. Stagger each subsequent row in a classic brick-bond pattern so that cross seams never align. When working on slopes, lay slabs across the fall of the hill to stop washout and slippage.
Step 6: Detail Cuts and Boundary Edges
6️⃣ Precision Edge Cutting
Using a razor-sharp utility knife or a handsaw, cut around trees, curved garden beds, and irrigation sprinkler bodies.
Always slice slabs from the underside or score firmly through the top thatch. Avoid using short cutoffs (anything under 300mm) along exposed borders, as small offcuts dry out quickly; always place small cutoff pieces in the middle of a run flanked by full slabs.
Step 7: Compaction Rolling
7️⃣ Drum Rolling for Root Strike
Fill your turf roller with water to roughly half capacity. Roll the entire lawn surface in a cross-directional pattern (first lengthways, then across the rows).
This step presses the root base directly into the screeded topsoil, pushes out air pockets, and seals the joints between turf slabs, preventing the edges from drying out and lifting.
Step 8: Initial Deep Soaking
8️⃣ Flooding and Establishment Irrigation
Begin watering immediately. Do not wait until the entire lawn is finished if working in high heat—water sections as you complete them.
Apply enough water so that moisture penetrates clean through the slab and into the top 50mm of the underlay soil. Check this by gently lifting a corner of a slab in several spots. Continue daily watering for the first 14 days, running sprinklers early in the morning before daytime heat sets in.
Common Mistakes to Avoid
Pro Tips
💡 Moisten the Underlay First: On hot summer days, run a fine mist over the screeded topsoil just before laying turf. Laying raw turf roots directly onto baking, dry sand scorches sensitive root hairs before you even turn the sprinkler on. 💡 Tuck Your Boundary Edges: Use your landscape rake handle or the back of a shovel to gently taper and tuck the outermost edges of the turf into the garden border or path edge. Exposed edges lose moisture first. 💡 The "Tug Test" Before Mowing: Never mow a new lawn based on the calendar. Check readiness at day 10–14 by firmly tugging a handful of leaf blades upward. If the slab lifts, the roots have not knitted; wait until the slab resists lifting before taking the mower over it with the blades set high. 💡 Hire the Right Plant for Access: If your side access is under 1000mm, hire a narrow mini track loader or walk-behind mini dumper to ferry underlay soil into the backyard. Moving 10 tonnes of soil by hand wheelbarrow can burn an entire day before you even unwrap a slab.Recommended Tools
🔧 Recommended Equipment
Red Roo or Bluebird Petrol Turf Cutter — Self-propelled cutting deck with adjustable depth settings; essential for clean, uniform subgrade stripping without destroying the site profile. Toro Dingo / Kanga Mini Skid Steer (Narrow Track) — Compact 800mm to 1050mm machine width; saves hours of manual labour when spreading and grading 100mm soil depths in confined backyards. Lawn Solutions Australia Aluminium Level Screed (3.0m) — Dual-sided heavy-duty box screed bar that delivers dead-flat turf underlay finishes along concrete margins. Galvanised Steel Water-Filled Lawn Roller (500mm-600mm Drum) — Essential for eliminating sub-surface air voids to guarantee 100% root-to-soil contact across every slab.Frequently asked questions
- What depth of soil underlay is required for instant turf in Australia?
- Instant turf requires a minimum base depth of 100mm of certified turf underlay compliant with AS 4419-2018. For heavy clay or heavily compacted subgrades, contractor best practice mandates 150mm of an 80/20 washed sand to organic compost mix. Skimping below 100mm restricts root depth, limits drought tolerance, and leads to surface drying.
- How long can instant turf sit on a pallet before laying?
- Instant turf must be laid within 24 hours of harvest in cool weather, and within 12 hours during summer. Palletised rolls generate internal heat via anaerobic respiration that quickly exceeds 40°C, killing root systems. If installation delays occur, immediately unstack rolls in shaded areas and keep the root zone lightly hydrated.
- How much water does new instant turf need to establish?
- New instant turf requires 15mm to 25mm of water daily for the first 14 days following installation. Water early in the morning to maintain continuous moisture in the top 100mm underlay without causing pooling. Once roots anchor firmly into the subgrade after two to three weeks, reduce irrigation to deep, twice-weekly sessions.
- What is the Australian standard for turf underlay soil?
- The Australian standard for turf underlay soil is AS 4419-2018, which governs soils for landscaping and garden use. This standard specifies hydraulic conductivity, organic matter content, low bulk density, and a target pH between 6.0 and 7.5. Certified underlay typically uses an 80/20 sand-to-compost ratio to prevent post-installation settling.
- When is the best time of year to lay instant turf in Australia?
- Autumn and spring are the best seasons to lay instant turf across most Australian climate zones. Mild temperatures during these months promote lateral root growth without the thermal stress of high summer or the dormancy triggered by winter frosts. Warm-season varieties such as Sir Walter DNA Certified buffalo establish most reliably in soils above 15°C.
- How soon can you mow newly laid instant turf?
- New instant turf can generally be mowed 10 to 14 days after laying, once the root system anchors firmly. Test root attachment by gently pulling upward on a turf edge; if it resists lifting, it is safe to mow. Always use a sharp blade on the highest mower deck setting.
Written by Digger, the Earthmoving & Landscaping specialist at Aus.Tools.